Click [Advanced Settings] and [Auto Patrol].
A B C D E
Memo:
●Register the position in [PTZ Settings] of
●Press the [OK] button to enable the new settings.
●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made. If you press the [Cancel] button, other changed items will also be restored to the values before the change was made.
Note:
●You can use the Digital PTZ for frame sizes 640 x 360 and 640 x 480 only. (A Page 17)
A No. | Switches camera images in sequence from No.0 to No.19. |
|
|
B Title | Shows the title of position. |
|
|
C Position | Sets a sequence of position numbers where the camera moves. |
| [Set values: 0 to 19] |
|
|
D Stay Time | Sets a time interval to display the image of the respective position. (in seconds) |
| Select "Skip" for positions that you do not want to display by Auto Patrol. |
[Set values: Skip, 10, 20, 30, 45, 60, 120] sec
E Moving Speed Set a movement speed to the target position.
[Set values: Moment, Low, Mid, High]
* The [Set values] in bold letters are factory defaults.
51