Protocol Page
This page sets the protocol.
This page can be used during access using AadminB.
A
B
C
D
Click [Advanced Settings] and [Protocol].
Memo:
●Press the [OK] button to enable the new settings.
●If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the change was made. If you press the [Cancel] button, other changed items will also be restored to the values before the change was made.
●When you connect via Internet Explorer after changing protocol settings, enter the address using the new server port and port number in the address bar.
●The camera's default settings do not support using the HTTPS and SNMP functions. For protocol settings when using HTTPS with SNMP, see "HTTPS and SNMP Function Update Procedure". (A Page 125)
A Server Certificate | Specifies settings related to server certificates. | |
|
|
|
| Register Information | Displays valid server certificates. |
|
|
|
| Local Certification | When you press the [Create Server Certificate] button, displays |
|
| the screen for entering information required to create a server |
|
| certificate. |
|
|
|
B Protocol Settings | Sets protocols. | |
|
|
|
| HTTP/HTTPS | Select the protocol to use. |
|
| [Set values: HTTP, HTTPS] |
|
|
|
|
| * The [Set values] in bold letters are factory defaults. |
61