Internet Explorer Setting
Settings (continued)
Network Page (continued)
IP Setting |
|
|
| ||
|
|
|
| ||
| A IP Setting |
| Sets the DHCP client function. | ||
|
|
| To enable the DHCP, connect the camera to the network | ||
|
|
| environment where the DHCP server is running. | ||
|
|
| If you have AenabledB the DHCP but the DHCP server does not exist, | ||
|
|
| the camera will start with the IP address of 192.168.0.2 and the subnet | ||
|
|
| mask of 255.255.255.0 approximately 2 minutes after startup. For the | ||
|
|
| IP address details, see the "Instructions (IP Address Settings)." | ||
|
|
| [Set values: DHCP Disable, DHCP Enable] | ||
|
|
|
| ||
| B IP Address |
| Sets the IP address of camera. | ||
|
|
| [Factory default: 192.168.0.2] | ||
|
|
|
| ||
| C Subnet Mask |
| Sets the subnet mask of camera. | ||
|
|
| [Factory default: 255.255.255.0] | ||
|
|
|
| ||
| D Default Gateway |
| Sets the default gateway of camera. | ||
|
|
| Enter "0.0.0.0" if you do not want to set a default gateway. | ||
|
|
| [Factory default: 0.0.0.0] | ||
|
|
|
| ||
| E Host Name |
| Sets a host name of camera. | ||
|
|
| It can consist of alphanumeric characters, hyphen | ||
|
|
| Underscore (_) character is not allowed to use. | ||
|
|
|
| ||
| F DNS Server |
| Sets an address of DNS server. | ||
|
|
| [Factory default: 0.0.0.0] | ||
|
|
|
| ||
| G MAC Address |
| The MAC address of camera is shown as a hexadecimal number. | ||
|
|
|
| ||
| H IP Protocol |
| Turns the IP Version 6 setting On or Off. (IP Version 4 is usually set to On.) | ||
|
|
|
| ||
| I IPv6 Address |
| When you enable the IP Version 6 setting, two address types are | ||
|
|
| displayed. They are: Alink localB and AglobalB. However, if the IPv6 is | ||
|
|
| not supported by the connected network, the AglobalB address bar is | ||
|
|
| shown as ADisabledB. | ||
|
|
|
|
|
|
Other |
|
|
| ||
|
|
|
| ||
| J Negotiation |
| Sets the network negotiation. | ||
|
|
| If you have selected a value other than AAutoB, do not set the connected | ||
|
|
| network device to AAutoB. Be sure to set it to the same value as the camera. | ||
|
|
| [Set values: Auto, 100M Full, 100M Half, 10M Full, 10M Half] | ||
|
|
| Memo: |
|
|
|
|
|
| ||
|
|
| ● The camera and another connecting device on the network may | ||
|
|
| connect automatically when the other than "Auto" is selected for | ||
|
|
| the camera and "Auto" is set for the other connecting device. | ||
|
|
|
|
| |
|
|
|
| ||
| K TOS(DS field) |
| Sets a TOS value of IP packets which contain visual data. | ||
|
|
| [Set values: 0 to 252] | ||
|
|
|
| ||
| L TTL(unicast) |
| Sets a TTL value of TCP packets which contain visual data. | ||
|
|
| [Set values: 1 to 64 to 255] | ||
|
|
|
| ||
| M TTL(multicast) |
| Sets a TTL value of UDP packets which contain visual data. | ||
|
|
| [Set values: 1 to 32 to 255] | ||
|
|
|
| ||
| N MTU |
| Sets the maximum size of packets which contain visual data. | ||
|
|
| [Set values: 1280 to 1500] | ||
|
|
|
|
| |
|
|
|
| * The [Set values] in bold letters are factory defaults. | |
60