HD IP CAMERA
| Instructions (Installation) | ||
|
|
| |
|
|
| |
| |||
For Customer Use: |
|
| |
Enter below the Model No. which is located |
|
| |
on the body. | < | ||
Retain this information for future reference. | Thank you for purchasing this product. |
| |
Model No. |
| ||
Before operating this unit, please read the instructions carefully | |||
Serial No. | |||
to ensure the best possible performance. |
| ||
|
| ||
The standard camera installation procedure can be found on the back side of this page.
© 2012 JVC KENWOOD Corporation |
Safety Precautions
The power rating is AC 24 V, 50/60 Hz/PoE
A level of supplied power that exceeds the ratings may result in failures, smoke or fire. If the camera breaks down, turn off the power and contact our service center immediately.
If a level of power that exceeds the ratings is supplied, the internal components may be damaged even if no abnormalities are observed in the appearance and/or operation of the camera. Contact our service center immediately to arrange for an inspection (charged separately).
Attachments and Accessories
Instructions ....................................................... | 2 |
1 | |
WARRANTY CARD (For USA)......................... | 1 |
SAFETY PRECAUTIONS
FOR USA
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.
IMPORTANT SAFEGUARDS
1.Read all of these instructions.
2.Save these instructions for later use.
3.All warnings on the product and in the operating instructions should be adhered to.
4.Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
5.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
6.Do not use this appliance near water - for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
7.Do not place this appliance on an unstable cart, stand, or table. The appliance may
fall, causing serious injury to a child or adult, and serious damage to the
appliance. Use only with a cart or stand recommended by the manufacturer, or
sold with the appliance. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit
approved by the manufacturer.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
8. | Slots and openings in the cabinet and the back or bottom are |
| provided for ventilation, and to insure reliable operation of the |
| appliance and to protect it from overheating, these openings |
| must not be blocked or covered. The openings should never |
| be blocked by placing the appliance on a bed, sofa, rug, or |
| other similar surface. This appliance should never be placed |
| near or over a radiator or heat register. This appliance should |
| not be placed in a |
| unless proper ventilation is provided. |
9. | This appliance should be operated only from the type of power |
| source indicated on the marking label. If you are not sure of |
| the type of power supplied to your home, consult your dealer |
| or local power company. For appliance designed to operate |
| from battery power, refer to the operating instructions. |
10. | For added protection for this product during a lightning storm, |
| or when it is left unattended and unused for long periods of |
| time, unplug it from the wall outlet and disconnect the antenna |
| or cable system. This will prevent damage to the product due |
| to lightning and |
11. | Do not allow anything to rest on the power cord. Do not locate |
| this appliance where the cord will be abused by persons |
| walking on it. |
12. | Follow all warnings and instructions marked on the appliance. |
13. | Do not overload wall outlets and extension cords as this can |
| result in fire or electric shock. |
14. | Never push objects of any kind into this appliance through |
| cabinet slots as they may touch dangerous voltage points |
| or short out parts that could result in a fire or electric shock. |
| Never spill liquid of any kind on the appliance. |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class A digital apparatus complies with Canadian
Cet appareil num rique de la Class A est conforme á la norme
Due to design modifications, data given in this instruction book are subject to possible change without prior notice.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
AVERTISSEMENT
POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, NE PAS EXPOSER L'APPAREIL A L'HUMIDITE OU A LA PLUIE.
FOR EUROPE
WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Dear Customer
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
European representative of JVC KENWOOD Corporation is: JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg Germany
Sehr geehrter Kunde, sehr geehrte Kundin, dieses Gerät stimmt mit den gültigen europäischen Richtlinien und Normen bezüglich elektromagnetischer Verträglichkeit und electrischer Sicherheit überein.
Die europäische Vertretung für die JVC KENWOOD Corporation ist:
JVC Technical Services Europe GmbH Postfach 10 05 04
61145 Friedberg Deutschland
Information for Users on Disposal of Old Equipment
Operating Precautions
Storage and Operating Environment
●This camera has been designed for indoor use. If you use it outdoors, install a housing.
●Do not install the camera in the following environments. Doing so may result in malfunctions or failure.
•Hot or cold locations beyond ambient temperature range
•Locations beyond the allowable operating humidity range (20 %RH to 90 %RH) (no condensation allowed).
•Near equipment that emits strong magnetic fields, such as transformers or motors.
•Near equipment that emits radio waves, such as transceivers and mobile phones.
•Locations in which excessive dust or sand exist.
•Locations that are subject to vibration.
•Locations prone to moisture such as sides of windows.
•Locations that may contain steam or oil, such as kitchens.
•Locations that are subject to radiation emissions,
•Locations where chemicals are used, such as swimming pools.
●Use of this camera and cables connected to this camera at locations where strong electrical or magnetic waves are generated (e.g. near a radio, TV, transformer, monitor, etc.) may result in images being affected by noise interference or colors being changed.
●Do not install this camera at a location that traps heat.
This camera discharges heat from the surface of the main unit. Do not install at a location that may trap heat, such as near the walls.
Handling Precautions
●Do not suspend yourself from this camera, shake it or hang objects over it.
Applying excessive load may cause the camera to fall off and cause an accident.
●Do not stack devices on top of each other.
Doing so may cause a malfunction or failure due to overheating or noise, or cause a fire.
●Do not block the vents.
Inadequate heat ventilation may cause this camera to malfunction. Be sure not to block the vents around the camera.
Copyright Protection
●With the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in principle to duplicate, modify or transmit copyrighted material.
●Unauthorized duplication, modification or transmission of copyrighted material may constitute a copyright infringement, and the user may be liable to pay compensation for damages. When using copyrighted material, be sure to check the license agreement or the copyrighted material thoroughly.
●When rights or rights holders are involved with regard to the targeted subject of duplication, permission may be required for shooting or using (processing) it. Be sure to check the licensing conditions thoroughly.
●Use of recorded materials without first gaining the prior consent of the author is forbidden under copyright law except in cases of personal use.
Disclaimer
●The motion detection feature is not a feature to prevent theft or fire. Our company shall not be liable for any loss or damage resulting from the use of this feature.
●We shall not be responsible for any loss or damage caused in the event of privacy invasion as a result of camera footage created by this product.
Maintenance
●Turn off the power before performing maintenance.
●Wipe using a soft cloth.
Wiping with thinner or benzene may melt or tarnish its surface. For tough stains, wipe using a cloth that has been dipped into a neutral detergent diluted with water. Following that, wipe with a dry cloth.
Saving Energy
●If the camera is not going to be used for a long period of time, turn off the power or the system for safety reasons and to conserve energy.
Others
●This camera has a
●When this camera is used with the white balance set to "ATW" (Auto Tracking White Balance), the color tone of some objects may differ slightly from the actual color due to the principle of the automatic tracking white balance circuit. This is not a malfunction.
●The electric shutter of this camera is set to "1/30" by factory default. For regions with a commercial power frequency of 50 Hz, switch to the Flickerless mode during use under fluorescent lights (excluding inverter lighting equipment) to prevent flickers.
●When the electronic sensitivity enhancement feature is enabled, the screen may appear grainy and more white spots may appear because the sensitivity is increased. However, this is not a malfunction.
●If the power supply voltage is momentarily cut off or reduced due to lightning or the power supply to the air conditioner being turned on, the image may be disrupted or noise interference may occur.
●When using multicast, make use of an IGMPv2- compliant network switch.
●Some hubs/switches of products that are equipped with intelligent features may include a broadcast/ multicast suppression function. If this function is enabled, viewing of multicast images on this camera may fail.
●When the Easy Day and Night or Day and Night is set to "Auto", the image becomes black and white in dark locations. As the sensitivity level is increased in this case, the screen may appear grainy and more white spots may appear. When switching between color and
●It is recommended that shielded LAN cables be used to connect to this camera. The safety and reliability of this camera has been checked using shielded cables.
●Under halogen lamps, light bulbs and other light sources that emit strong infrared light, black objects may look almost purple in the recording. It is an inherent characteristic of this camera and not a defect.
●During viewing using the
15. Do not attempt to service this appliance yourself as opening |
or removing covers may expose you to dangerous voltage |
or other hazards. Refer all servicing to qualified service |
personnel. |
16. Unplug this appliance from the wall outlet and refer servicing to |
qualified service personnel under the following conditions: |
a. When the power cord or plug is damaged or frayed. |
b. If liquid has been spilled into the appliance. |
c. If the appliance has been exposed to rain or water. |
d. If the appliance does not operate normally by following the |
operating instructions. Adjust only those controls that are |
covered by the operating instructions as improper adjustment |
of other controls may result in damage and will often require |
extensive work by a qualified technician to restore the |
appliance to normal operation. |
e. If the appliance has been dropped or the cabinet has been |
damaged. |
f. When the appliance exhibits a distinct change in performance |
- this indicates a need for service. |
17. When replacement parts are required, be sure the service |
technician has used replacement parts specified by the |
manufacturer that have the same characteristics as the original |
part. Unauthorized substitutions may result in fire, electric |
shock or other hazards. |
18. Upon completion of any service or repairs to this appliance, |
ask the service technician to perform routine safety checks to |
determine that the appliance is in safe operating condition. |
FOR USA AND CANADA
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICK SHOCK. DO NOT REMOVE COVER (OR BACK). NO
The lightning flash wish arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that age" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Information for USA
This device complies with part 15 of the FCC Rules. Changes or modifications not approved by JVC could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
CAUTION
CHANGES OR MODIFICATIONS NOT APPROVED BY JVC COULD VOID USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
[European Union]
|
|
|
|
|
|
|
| This symbol indicates that the electrical and |
|
|
|
|
|
|
|
| electronic equipment should not be disposed as |
|
|
|
|
|
|
|
| general household waste at its |
|
|
|
|
|
|
|
| Instead, the product should be handed over to |
|
|
|
|
|
|
|
| the applicable collection point for the recycling |
|
|
|
|
|
|
|
| of electrical and electronic equipment for proper |
|
|
|
|
|
|
|
| treatment, recovery and recycling in accordance with |
|
|
|
|
|
|
|
| your national legislation. |
|
|
|
|
|
|
|
| |
Attention: | By disposing of this product correctly, you will help | |||||||
This symbol | to conserve natural resources and will help prevent | |||||||
potential negative effects on the environment and | ||||||||
is only valid in human health which could otherwise be caused by | ||||||||
the European | inappropriate waste handling of this product. For | |||||||
Union. | more information about collection point and recycling |
| |
| of this product, please contact your local municipal |
| office, your household waste disposal service or the |
| shop where you purchased the product. Penalties |
| may be applicable for incorrect disposal of this |
| waste, in accordance with national legislation. |
(Business users)
If you wish to dispose of this product, please visit our web page http://www.jvc.eu to obtain information about the take- back of the product.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment.
●This installation should be made by a qualified service person and should conform to all local codes.
●This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70. The unit is to be powered by a Listed Class 2 power supply or using the PoE.
●The AC 24 V power supply should conform to the following: Class 2 only (For USA), Isolated power supply only (For Europe and other).
●Any Mention in this manual of Alarm inputs have not been evaluated by UL to be used for Burglar Alarm Functionality.
●Special technique is required when installing this product. Please refer to your dealer for installation.
●Rating label is pasted at the bottom or top of the camera unit.
●JVC is not liable for any compensation if you drop the camera due to insecure mounting by not following the installation description. Pay careful attention during installation.
●When mounting this product to a ceiling or wall, select a location strong enough to support the weight of this camera. If the location is not strong enough to support the weight, be sure to reinforce the ceiling or wall before installation.
●The camera may drop if the mounting screws are not tightened securely. Check that the screws are tightened appropriately and securely.
●Do not install the camera near lighting fixtures of high temperature, such as spot lights. It might result in failure or fires.
●It should be noted that it may be unlawful to
●The latest version
Please visit V.NETWORKS web site to check the latest firmware at http://www3.jvckenwood.com/english/pro/ vnetworks/index.html
☞ Continued overleaf 1