Mounting the Camera

Use the screw hole on the camera mounting bracket to mount this camera to a fixer or rotating platform.

Camera

 

Mounting

Camera Mounting

Screw Hole

Bracket Fastening Screw

1/4-20UNC

(2 pcs: M2.6 x 6 mm)

 

Mounting the camera mounting bracket on top of the camera

Camera

Mounting

Bracket

Camera

Anti-rotation Hole Mounting

Bracket

Fall

Prevention

Wire

M3x6 mm

6 mm

2 mm

Caution:

When mounting the camera, use screws with a length between 5 mm to 7 mm from the mounting surface. Screws beyond the specified length may damage the interior, while those shorter than specified may cause the camera to fall off, and therefore these must not be used.

1/4-20UNC

5 mm and above

7 mm and below

Caution:

The camera mounting bracket is mounted on the top surface of the camera by default. To mount it to the bottom surface, do so by removing the two fastening screws from the camera mounting bracket. Make sure to fasten the screws firmly.

18