Monitor Signal Output Terminal Connection

Make use of this terminal for camera angle adjustment during installation or focus adjustment in the Focus Assist mode. Connect it to devices such as a video monitor using a video cable (RCA).

Memo:

●It is convenient to adjust focus using focus assist mode. (A Page 24)

1

2

G 2 1

2 1

 

AC24V

INPUT

 

OUTPUT

ALARM

 

CLASS2 ONLY FOR USA ISOLATEDPOWER ONLY FOREUROPE ANDOTHER

 

PoE

AUDIO

IN/OUT

 

 

10BASE-T/

 

 

SEE INSTRUCTION

 

100BASE-TX

 

 

CAUTION: NEVER

 

PoE AND AC 24V AT THE SAME TIME

 

DO NOT CONNECT TO

 

TELEPHONE NETWORK

PUSH

Audio Signal Input/Output Terminal Connection

Connect the mini jack R3.5 stereo cable.

L ch : Connect to speakers with built-in amplifier, etc.

R ch : Connect to plug-in power type capacitor microphone

1

2

G

2 1

2 1

 

 

G

 

 

 

AC24V

INPUT

ALARM

OUTPUT

CLASS2 ONLY FOR USA ISOLATEDPOWER ONLY FOREUROPE AND OTHER

 

 

OUT

PoE

 

IN/OUT

 

MONITOR

 

 

 

 

 

 

10BASE-T/

 

SEE INSTRUCTION MANUAL

 

100BASE-TX

 

CAUTION: NEVER USE PoE AND AC 24V AT THE SAME TIME

 

DO NOT CONNECT TO THE TELEPHONE NETWORK

PUSH

Line Out

L ch

Speakers with Built-in Amplifier

Condenser microphone

Note:

●A longer cable extension distance causes signals to be attenuated, image resolution to deteriorate and noise to increase.

Memo:

●Select the signal system for the monitor

output using the[MONITOR OUT]switch at the side of this product. (ANTSCB or APALB)

After adjusting the camera angle, set the switch to AOFFB. After changing the switch settings, press the [RESET] button to reboot the camera.

R ch compatible with plug in power.

Note:

●Make sure that the external microphone is connected to the R ch and not other channels. When the microphone jack is plugged directly into the unit's [AUDIO IN/ OUT] terminal, loud noises can be

distributed to the network.

19