Network Settings

IP Address Settings (continued)

IP address setting at the computer

Set the computer to an IP address that enables communication with VN-X35U. Procedures described in this item are intended for Windows XP users.

1.Click [Start]

●Select in the sequence of [Control Panel]-[Network Connection]-[Local Area].

●Windows Vista : Select in the sequence of [Settings]-[Control Panel]-[Network and Sharing Center]-[Manage network connections].

2.The computer on which Internet Explorer is launched automatically selects the connected network

●Right-click and select [Properties].

●Check to ensure that the [Client for Microsoft Networks] and [Internet Protocol(TCP/IP)] check boxes are selected.

●Windows Vista：Check to ensure that the [Microsoft Network Client] and [Internet Protocol Version 4 (TCP/IPv4)] checkboxes are selected.

3.Select [Internet Protocol(TCP/IP)] and click [Properties]

Windows Vista：Select [Internet Protocol Version 4 (TCP/IPv4)], and click [Properties]

4.Set the IP address

A Select [Use the following IP address].

B Specify the [IP address]. (For example, use 192.168.0.100 when VN-X35U is in its default settings and there is no DHCP server)

Memo:

Make sure that you take note of the original IP address before altering.

Note:

Ensure that a duplicate IP address is not specified within the same network environment.

C Set [Subnet Mask] to a value that is appropriate for the setting operation. Consult the network administrator if you have any queries.

(Use 255.255.255.0 when VN-X35U is in its default settings and there is no DHCP server)

D When a [Default Gateway] is present,

Clickmake use of the corresponding IP address (e.g., 192.168.0.254).

5.Click [OK] on the ALocal Area Connection PropertiesB screen

28