Preparing the power supply Insert rechargeable nickel metal hydride batteries
Recharging the Rechargeable Batteries
Insert batteries in the Main unit.
1
Rechargeable battery:
2 1 
Compartment A Compartment B
Insert two rechargeable batteries in the battery charger.
•Insert them in the correct ª and · polarity as indicated inside the battery charger.
•The two batteries will be recharged separately one after another.
1Open the battery compartment cover.
Battery compartment cover
Card cover
(Open it while pushing the battery compartment cover.)
2
To a household power outlet
Insert the power plug blades into a household power outlet.
•Recharging begins with the battery inserted in position A. The recharging of two batteries will complete in about
•It is possible to recharge about 300 times.
•After recharging completes, remove the power plug blades from the power outlet.
2 Insert batteries.
• Insert them in the correct ª and · polarity as indicated
1 | 2 | inside the battery compartment. | |
(You can use L30 (24A) | |||
| |||
|
| ||
|
| alkaline batteries or recharge- | |
|
| able batteries only.) |
Charge indicator lamps
A charging state | B charging state | Completed |
Charging | Finished | Finished |
Compartment A |
|
|
(Fast | (Continuous on) | (Continuous on) |
| Charging | Finished |
Compartment B |
|
|
(Slow | (Fast | (Continuous on) |
•If two batteries are inserted in the battery charger that has already been plugged into the power outlet, the
•Fast blinking refers to one blink per about 1 second, and slow blinking refers to one blink per about 3 seconds.
3 Close the battery compartment cover.
Battery compartment
cover
RELEASE :PUSH CARD
Card cover
■Caution for use of dry cell batteries:
Be sure to use L30 (24A) alkaline batteries. Manganese batteries cannot be used to power the unit.
■Remaining battery power display:
Use the remaining battery power indicator in the display panel as the reference for identifying the available power.
Blinking
|
| Recharge |
High | Low | (or replace). |
Notes on battery replacement
During recharging of the batteries, use two L30 (24A) alkaline batteries, which is available in electric appliance stores. The
Hold mode
The hold mode protects the unit against accidental press of control buttons.
HOLD | MODE | NORM |
It prevents the following acci- dents:
•Battery exhaustion by turning the unit on without noticing it.
•Interruption of playback due to accidental press of a button.
