![BASIC OPERATIONS](/images/new-backgrounds/29728/2972817x1.webp)
BASIC OPERATIONS
Now you can play a variety of video CDs!!
Display window
The display window indicates many aspects of control and operation status.
|
|
| 4 |
1 | 2 | 5 | 3 |
1Shows the disc number being played.
2Shows mainly the total number of tracks and the track number being played.
3Shows mainly the cumulative time (minutes and seconds) of the
track. Afterward, total time of the disc is displayed.
4The combination of VCD, PBC, and
5Each indicator in this area lights when the corresponding function is activated.
Loading discs in the disc tray
Use the 0 OPEN/CLOSE (or 0 on the remote control) button to open and close the disc tray.
OPEN/CLOSE
or
(Remote control)
1.Open the disc tray by pressing the 0 (OPEN/CLOSE) button.
2.Place discs on the disc tray according to the groove with their label side up.
• To turn the disc tray press DISC SKIP button.
3.Close the disc tray by pressing the 0 (OPEN/CLOSE) button.
CAUTION
When loading discs in the disc tray, be sure to put the discs according to the groove. Otherwise, the discs will be damaged when the disc tray is closed, and cannot be removed from the unit.
Preparation for playing
Turn on the television set, amplifier or receiver to which the Player is connected. Then select the proper channel and mode to operate the Player.
CAUTION
Set the sound volume of the television set, amplifier or receiver to which the Player is connected to a reasonable level before starting playback.
Press the / button on the front panel or the VCD
/ (TV
/ ) button on remote control. The STANDBY indicator goes out.
VCD /
TV /
/
or
STANDBY/ON
(Remote control)
The display window shows the initial information as shown below.
Starting to play disc(s)
Press the 3SELECT (PLAY) button. The Player starts to play from the disc indicated in the display window.
For individual track selection, use the number keys or the 4/
¢PREV/NEXT buttons.
SELECT
or
SELECT
(Remote control)
When you start play, the Display window shows the disc number and the track number being played.
If the PBC function is activated, the display window shows “Pb”. When you press 3 SELECT button during play, the disc will restart from the beginning of the track except when the PBC function is activated.
Page 6