JVC XL-FZ158BK, XL-FX258BK manual Playing tracks in a desired order, To modify the program contents

Playing tracks in a desired order

You can play only the favorite tracks in any desired order.

VARIOUS PLAYBACK PATTERNS

Ö You can skip to a desired program step with the 4/¢ button.

If you have programmed all disc (1~5) as “AL”,pressing ¢ (or

PLAY MODE

	XL-FZ258 COMPACT DISC AUTOMATIC CHANGER
	CALL	MEMORY	RANDOM	PLAY MODE	REPEAT
POWER			DISC
	1	2	3	4	5
PHONES LEVEL
MINMAX
PHONES	5	DISC

PLAY & EXCHANGE SYSTEM

						3 PLAY/
	STOP/CANCEL					8 PAUSE
		DISC SKIP		SEARCH	STOP/CANCELPLAY/PAUSE
	STANDBY
	RECEIVED					/
						OPEN/CLOSE
	1	2	3	4	5	EXCHANGE
1 BIT P E M D D CONVERTER	6	7	8	9	10	+10

4) will skip to the next (or previous) disc.

Ö When the DISC SKIP button is pressed during program play, the

playback skips to the next programmed disc.

To check the program contents

Press the CALL button during stop mode. Each time the CALL button is pressed, the program contents are displayed in the programmed order.

Track buttons

1. In stop mode, press the PLAY MODE button on the main unit or the PROGRAM button on the remote control unit so that the PROGRAM indicator lights on the display.

2. Select the disc which contains the track to be programmed with the DISC button.

“AL” (all tracks) appears on the display.

To program the entire disc

Skip step 3 below. When the track number is not specified after selecting the disc number, all tracks on the selected disc are programmed.

3. For XL-FZ258BK, select the track number by pressing the track buttons. For XL-FZ158BK, select the track number by pressing the 4/¢ SEARCH button and then the MEMORY button.

Refer to “Specifying a desired track” on page 8 for entering the track number. For XL-FZ158BK, press the MEMORY button with the desired track number shown on the display.

When the selected track number is programmed, the following display appears.

				Display shows the disc
				number and the track
1	2	4	P R O G R A M
			5	number selected for step 1.
DISC	TRACK		9
			STEP

Ö For XL-FZ258BK , you can also use the 4/¢ SEARCH button then the MEMORY button to select a track number.

ÖIf you want to cancel the displayed program step, press the 7 STOP/CANCEL button on the main unit or the CANCEL button on the remote control unit and then enter the new disc number and/ or track number.

4. Repeat steps 2 and 3 for other tracks and/or discs to be programmed.

You can program up to 32 steps.

5. Start playback by pressing the 3PLAY/8PAUSE button on the main unit or the 3 button on the remote control unit.

The programmed tracks and/or discs are played in the pro- grammed order.

ÖWhen the unit is in program play mode, press the 7button to enter stop mode and then operate the CALL button.

To modify the program contents

Press the CALL button until the display shows the program step to be corrected. Enter the new disc number and/or track number referring to steps 2 and 3 above.

To delete a program step, press the CALL button until the display shows the program step to be deleted and then press the 7 STOP/ CANCEL button on the main unit or the CANCEL button on the remote control unit. You can also delete a displayed program step during programming.

ÖWhen the unit is in program play mode, press the 7button to enter stop mode and then delete the program step.

To add discs/tracks to the program during program play- back

Specify the disc number by pressing the DISC button and, with XL- FZ258BK, the track number by pressing the track buttons.

The specified disc/track is added to the end of the program being played back.

ÖFor XL-FZ158BK, only the disc number can be specified and the entire disc is added to the program. For this operation, it is not possible to utilize the 4/¢ SEARCH buttons.

To exit program mode

Press the PLAY MODE or RANDOM button on the main unit, or the CONTINUE or RANDOM button on the remote control unit, and the program mode is cancelled. However, the program contents are not erased and, whenever the program mode is selected, you can play the tracks in programmed order.

To clear the program

In stop mode, press the 7 STOP/CANCEL button on the main unit repeatedly. The program contents will be cleared step by step.

To clear the entire program, press the 0OPEN/CLOSE button on the main unit in stop mode. The program contents will be entirely cleared, however, the program mode is not cancelled.

Page 10