
PRECAUTIONS
Installation
•Select the best locationSelect a level location to install this component, where it is free from extremes of temperature (5 to 35°C, or 41 to 95°F), humidity, dust, or vibration.
If noise interference is caused during AM broadcast reception by a tuner/receiver located nearby, relocate it or this component, or turn off either one.
•Moving the unitBefore moving the unit, first remove all the discs. Turn the power off, making sure the standby indicator is lit. Then remove the AC power cord from the AC outlet.
Compact discs
• Use only compact digital audio discs |
|
Only the audio compact discs identified by | ' |
the logo shown on the right can be used with | |
this component. |
|
Operation
•Keep the disc storage free of obstaclesDo not put anything other than discs in slots of the disc storage.
•Turn the power off if a problem occursIf an unusual condition arises, turn the power off immediately. If the condition persists whenever the power is turned on, consult your JVC dealer.
•Do not pull the AC power cordDo not pull the cable when unplugging the AC cord from the wall socket or this component — hold and pull the plug body.
•Set the sound volume carefullyBe careful in setting the sound volume on your amplifier/receiver when playing a CD, which has almost none of background noise unlike analog records and tapes. Find out the right setting starting with a low level setting. Setting the level too high and starting a CD could damage the speakers.
•Protect the component against condensationCondensation inside the component could disrupt the proper transmission of the
English
32