
Installing batteries in the remote control
1. Remove the rear cover of the remote control unit.
2. Install batteries. Be sure that the batteries are installed with correct polarity, (+) and
3. Attach the rear cover.
CAUTION
•Install the batteries with their polarities correctly set.
•Remove the batteries if the remote control is not going to be used for an extended period of time.
•Do not expose the remote control to heat, flame, or direct sunlight.
Replacing the batteries
The service life of batteries normally lasts for about one year though it is dependent on the use of the remote control (it is shortened in low temperatures, too). Replace the batteries any time if the controllable range is reduced (max. range: 7 meters or 23 feet and 30 degrees away from the component).
CAUTION
•Be sure to replace them with the correct batteries (1.5V, R6P, AA).
•Do not use new and old batteries in combination.
English
54