PROGRAM MODE PLAYBACK
Discs and tracks can be selectively specified in a program and played according to the program in the PROGRAM mode.
The steps in the program can be played in a random order (RANDOM function).
The entire program can be played repeatedly (REPEAT function) or one program step can be selected and played repeatedly
Reviewing the steps:
Press the CALL button. One step is displayed each time the button is pressed.
Deleting a step:
Press the CALL button and display the necessary step. Then press the CANCEL button.
Adding a step:
An added step is placed in the last step automatically.
Basic mode
1.Select the mode.
Use the PLAY MODE button, or press the PROGRAM button on the remote control, showing “PROGRAM” on the display.
PLAY MODE | PROGRAM |
|
or
(Remote control)
2.Specify disc or track numbers in the order you want to play in the following manner:
(a)Specify a disc number and a track number.
Press the DISC or TRACK button and then use the DISC/ TRACK jog dial. The – or + buttons as well as the numeric buttons can also be used.
DISC
TRACK
or
(Remote control)
The track number can be omitted when programming a whole disc to be played.
Press the CANCEL button to cancel the specified disc and track numbers shown on the display.
(b)Press the MEMORY button to register the specification as program step 1.
MEMORY | MEMORY |
|
or
(Remote control)
Up to 32 steps can be entered in one program. Each disc, when the whole disc is to be played, or each track programmed is counted as one step.
(c)Repeat Steps (a) and (b) above to program the remaining steps.
Deleting all steps:
Press the STOP/CLEAR button. The entire program will be cleared.
3.Press the PLAY/PAUSE button or the 
button to start playing according to the program.
The program reviewing and modification procedures described above can also be performed when the playback is stopped.
The program will be retained and available whenever the PROGRAM mode is selected again as long as the unit is kept in the standby state.
If the AC power cord is disconnected from the outlet, the program will be erased.
Playing program steps in random order
To play every step in the program once in random order, press the RANDOM button, showing “RANDOM” on the display. Then start playing.
The playback will be stopped when all program steps have been played.
If the disc specified in the program is not in the disc storage, the playback stops. The playback starts again after you load the disc
and press the PLAY/PAUSE button or the 
button on the remote control.
Press the RANDOM button again to cancel the function, clearing the indication from the display during stop.
10
