Using the AC adaptor (not supplied)

AC power outlet

AC adaptor

Notes:

Even if the unit is turned off, small power is consumed as long as the AC adaptor is connected to the AC power outlet.

When you want to purchase the AC adaptor, see page 14.

Preventing Accidental Operation (Hold mode)

This function causes the unit to ignore, accidental button presses.

Hold mode prevents the following:

Powering on the unit accidentally (which can cause the batteries to go dead).

Play being cut off unexpectedly.

To use the Hold mode

HOLD

OFFON

To prevent the unit from powering on accidentally, set the HOLD switch to the ON position while the unit is turned off.

To prevent the unit from unexpected operation during play, set the HOLD switch to the ON position after you starts playing the disc.

When the unit is in Hold mode, “HOLd” and “” lights as follows.

Power on : “” stays lit.

Power off : “HOLd” and “” lights up for a few sec- onds when 6 is pressed.

Note:

If the HOLD switch is set to the ON position, you cannot turn on the unit.

Nederlands Español English

3