BASIC OPERATIONS
Basic functions for disc playback
Turning on the power of this unit
Press the |
| (STANDBY/ON) button to turn on this unit. The | |
STANDBY | indicator is turned off and the display is turned on. | ||
Remote control unit | Main unit | ||
STANDBY
STANDBY/ON
Press again to turn the power off and activate the standby mode. The STANDBY indicator is lit.
The power is automatically turned on also by;
ÖPressing the 0 OPEN/CLOSE button.
ÖPressing the 3button on the remote control unit or the 3/8 PLAY/ PAUSE button on the main unit.
Notes
ÖA small amount of power (4 watts) is consumed even in the standby mode.
ÖTo turn the power off completely, disconnect the power cord from the wall outlet.
Loading a disc in the disc tray
Use the 0 OPEN/CLOSE button to open and close the disc tray.
Remote control unit | Main unit | |||
|
|
| ||
OPEN/ | OPEN/CLOSE | |||
CLOSE |
|
|
| |
|
| 0 |
| |
|
|
|
| |
1. Open the disc tray by pressing the 0 OPEN/CLOSE button.
2. Place a disc on the disc tray according to the groove with its label side up.
3. Close the disc tray by pressing the 0 OPEN/CLOSE button.
Note
ÖWhen loading a disc in the disc tray, be sure to put the disc according to the groove. Otherwise, the disc will be damaged when the disc tray is closed, and the disc cannot be removed from the unit.
Good | No Good |
Compact disc
Disc tray
Main unit
Remote control operation (XL-V230BK Only)
Point the remote control unit towards the remote sensor and operate it steadily and carefully. The remote control unit can be used within a range of about 7 meters (23 feet) from the remote sensor, and at angles of up to about 30 degrees.
Page 7
