JVC XV-1000BK manual Selecting Preferences, Monitor Type, Digital Audio Output, Av Compulink Mode

Selecting Preferences

MONITOR TYPE

You can select a monitor type when you playback DVD discs recorded for wide screen televisions.

If your television has a normal (4:3) screen, select “4:3 PS ” (cuts both sides of the “wide” picture) or “4:3 LB ” (with masking bars to maintain the “wide” aspect ratio).

[on DVD disc]	[4:3 (normal) television screen]
	converted and output
	letter box conversion
squeezed recording	[16:9 wide television screen]
	pan scan conversion

If your television has a wide (16:9) screen, you have to select “16:9 WIDE”.

DIGITAL AUDIO OUTPUT

To connect the XV-1000BK digital output with an external amplifier or receiver equipped with an optical digital input, this item must be set correctly.

PCM ONLY: to connect to an optical input of an audio equipment.

PCM/AC-3: to connect to a Dolby AC-3 optical digital input of a Dolby

Digital AC-3 decoder.

The following chart shows the relationship between kinds of playback discs and output signals.

Playback discs	Output	Output
	(PCM/AC-3 mode)	(PCM ONLY
		mode)
DVD with 48-kHz, 16-bit linear PCM	48-kHz, 16-bit linear PCM	←
DVD with 48-kHz, 20/24-bit linear PCM	48-kHz, 20-bit linear PCM	←
DVD with 96-kHz, linear PCM	no output	←
DVD with Dolby AC-3	AC-3 bitstream	48-kHz,
		16-bit
		linear
		PCM
DVD with MPEG audio	48-kHz, 16-bit linear PCM	←
CD	44.1-kHz, 16-bit linear PCM	←
Video CD	44.1-kHz, 16-bit linear PCM	←

AV COMPULINK MODE

If you use the AV Compulink system, you must set this item correctly.

Select from the three options: DVD1, DVD2 and DVD3 according to the equipment to be connected.

See “AV Compulink system” on pages 54 and 55.

48