
Additional information
Additional | information |
|
|
Troubleshooting
Power
Power does not come on.
\Power plug is not inserted securely. Plug in securely.
Operation
“REGION CODE ERROR!” is shown on the TV screen.
\Region code of the inserted disc does not match the unit. Check the region code of the disc printed on the disc jacket.
Operation is not possible.
\Microcomputer malfunction due to lightning or static electricity. Turn off the power and unplug the power cord, then connect the power cord again.
\Moisture condensation caused by a sudden change of temperature or humidity. Turn off the power, then turn it on a few hours later.
\The disc does not allow the operation, or an unplayable disc is inserted. Check and replace the disc (see page 2).
[LOCK] is displayed on the display window and the disc tray does not open.
\When you press 0 while pressing down 7 on the unit in standby mode, the tray lock function is activated. The disc tray cannot be opened or closed in this status. To release this status, press 0 while pressing down 7 on the unit in standby mode.
Picture
Picture is noisy.
\The unit is connected to a VCR directly and the copyguard function is activated. Connect the unit so that the picture signal flows directly to the TV.
Picture is distorted when using COMPONENT VIDEO OUT or
\Both the component connection and
Audio
DVD VIDEO disc playback sound level is lower than TV broadcast sound level.
\Set the [D.RANGE CONTROL] preference to [TV MODE] (see page 23).
Analog audio output is distorted.
\Set the [OUTPUT LEVEL] preference to [LOW] (see page 23).
Sound is abnormal when
\Connect audio equipment with a
\Play back a source other than
MP3
No sound comes out.
\MP3 disc is recorded with the “packet writing.” It cannot be played.
Files (tracks) are not played in the recorded order.
\This unit plays the files in the alphabetic order. So, the playback order can vary.
Specifications
Specifications and appearance are subject to change without prior notice.
GeneralReadable discs | DVD VIDEO, |
| RW (Video format), SVCD, Video CD, Audio |
| CD |
| DA, SVCD, Video CD, MP3 format) |
Video format | NTSC |
Power requirements |
|
|
| AC 120 V | , 60 Hz |
Power consumption |
|
|
| 10 W (POWER ON), 0.7 W (STANDBY | |
| mode) |
|
Mass | 2.1 kg (4.7 lbs) | |
Dimensions (W ⋅ H ⋅ D) |
| |
| 435 mm ⋅ 53 mm ⋅ 248.4 mm | |
|
COMPONENT (pin jacks)
Y Output: 1.0
PB/PR Output: 0.7
1.0
Y Output: 1.0
C Output: 286
500 lines or more
Audio outputsANALOG OUT (pin jack)
2.0Vrms (10 kΩ)
DIGITAL OUT (COAXIAL)
0.5
Frequency response
| CD (sampling frequency 44.1 kHz): |
| 2 Hz to 20 kHz |
| DVD (sampling frequency 48 kHz): |
| 2 Hz to 22 kHz |
| (4 Hz to 20 kHz for DTS and Dolby |
| Digital bitstream signals) |
| DVD (sampling frequency 96 kHz) |
| 2 Hz to 44 kHz |
Dynamic range | 16 bit: More than 98 dB |
| 20 bit: More than 100 dB |
| 24 bit: More than 100 dB |
Wow and flutter | Unmeasurable (less than ± 0.002%) |
Total harmonic distortion
less than 0.006%
•Manufactured under license from Dolby Laboratories. “Dolby” and the
•“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
28