Basic operations
0 7 3
STANDBY/ON
STANDBY/
ON 
ANGLE
5/∞/2/3
CHOICE
ENTER
3
7
Basic | operations |
About invalid operation icon
When you press a button, and if the unit does not accept its operation, 
appears on your TV screen. Operations are occasionally unacceptable even if 
is not displayed.
Note that some operations may not be accepted. For example, some discs may not allow rapid advance/reverse or slow- motion playback.
Turning on/off the unit
Press STANDBY/ON 
on the remote control unit or press 
STANDBY/ON on the front panel.
The opening display appears on the TV screen, and the following messages may appear at the bottom of the opening display.
NOW READING
Message area
•NOW READING (The unit is reading the disc information.)
•REGION CODE ERROR! (The region code of the DVD VIDEO disc does not match the unit. The disc cannot be played back.)
•OPEN
•CLOSE
•NO DISC
NOTE
Even if you turn off the unit, the unit is not disconnected from the AC power source as long as it is connected to the wall outlet. This state is called standby mode. In this state, the unit consumes a very small amount of power.
Initial setup
When you turn on the unit for the first time after purchase, the following message appears on the TV screen.
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO SETTING
YES - PRESS ENTER NO - CANCEL
You can set the display language, TV monitor type and digital output before using the unit, by following the procedure below.
1 Press ENTER.The first page of the DVD PLAYER SET UP display appears. The
DVD PLAYER SET UP |
|
|
MENU LANGUAGE | ENGLISH | |
AUDIO LANGUAGE | ENGLISH | |
SUBTITLE |
| OFF |
ON SCREEN LANGUAGE | ENGLISH | |
|
| ENGLISH |
|
| SPANISH |
|
| FRENCH |
SELECT | USE 5∞23 TO SELECT, USE ENTER TO CONFIRM | |
ON SCREEN LANGUAGE options
2 Press 5/∞ to select the desired language.You can select the
FRENCH.
3 Press ENTER.The second page is shown, in which the
DVD PLAYER SET UP |
|
|
MONITOR TYPE |
| 4:3 L.B. |
PICTURE SOURCE | 16:9 NORMAL | |
16:9AUTO AUTO | ||
SCREEN SAVER |
| 4:3 LB |
| 4:3 PS | |
|
| |
SELECT | USE 5∞23 TO SELECT, USE ENTER TO CONFIRM | |
MONITOR TYPE options
4 Press 5/∞ to select the desired monitor type.For a normal (conventional) TV, select [4:3 LB] or [4:3 PS]. For a
The third page is shown, in which the
DVD PLAYER SET UP |
|
|
DIGITAL AUDIO OUTPUT | DOLBY DIGITAL/PCM | |
ANALOG DOWN MIX | PCM ONLY | |
DOLBY PROLOGIC | ||
|
| DOLBY DIGITAL/PCM |
D RANGE CONTROL | STREAM/PCM | |
OUTPUT LEVEL |
|
|
SELECT | USE 5∞23 TO SELECT, USE ENTER TO CONFIRM | |
DIGITAL AUDIO OUTPUT options
6