Preparations
Connecting the power cord
When all the audio/video connections have been made, connect the AC power plug to the wall outlet. Make sure that the plugs are inserted firmly.
Warning
•Disconnect the power cord:
-if you are not going to use the unit for a long time.
-before cleaning the unit.
-before moving the unit.
•Do not:
-connect or disconnect the power cord with wet hands.
-pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other accidents.
Caution
•Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately.
•Do not recharge, short, disassemble or heat the battery or dispose of it in a fire.
Doing any of these things may cause the battery to give off heat, crack, or start a fire.
•Do not leave the battery with other metallic materials.
Doing this may cause the battery to give off heat, crack, or start a fire.
•When throwing away or saving the battery, wrap it in tape and insulate; otherwise, the battery may start to give off heat, crack, or start a fire.
•Do not poke the battery with tweezers or similar tools.
Doing this may cause the battery to give off heat, crack, or start a fire.
•Dispose of batteries in the proper manner, according to federal, state, and local regulations.
Remote sensor
Preparations
• Do not alter, twist or pull the power cord, or put anything heavy | Point the top of the remote control unit toward the remote sensor | ||
on it, which may cause fire, electric shock, or other accidents. | |||
as directly as possible. If you operate it from a diagonal position, | |||
• If the cord is damaged, consult a dealer and have the power | |||
the operating range (approx. 5 m) may be shorter. | |||
cord replaced with a new one. | |||
|
| ||
| Remote sensor | ||
| |||
Using the remote control unit |
|
| |
|
| ||
|
|
| |
|
|
| |
To install battery
1 While pushing the lock lever (1), pull out the battery holder (2).2 Place the supplied battery on the battery holder with the + side facing up.Lithium coin battery (product number: CR2032)
3 Insert the battery holder back into position.5