Playing a MPEG4 Movie file

This unit can play MPEG4 files.

1.Insert a MPEG4 file recording media.

The MOVIE menu appears on the TV screen.

2.Press v / V to select a folder, and press ENTER. A list of files in the folder appears.

3.If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY (N). You can use variable playback functions.

Refer to page 16-17.

4.Press STOP (x) to stop the playback. The MOVIE menu appears.

Tips:

•If you are in a file list and want to return to the previous Folder list, use the v / V buttons on the

remote to highlight and press ENTER.

•Press DVD MENU to move to the next page.

•On a CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE, and MUSIC, PHOTO or MOVIE word on top of the menu is highlighted.

•The disc subtitle may not be displayed properly, if a MPEG4 subtitle is downloaded through the internet.

•If the Disc Subtitle setup menu does not have the MPEG4 subtitle language you are going to play, the subtitle may not be displayed properly.

Notice for displaying the MPEG4 subtitle

If the subtitle does not display properly, please follow the steps below.

1.During playback, press and hold SUBTITLE ( ) for about 3 seconds. The language code will appear.

2.Press b / B to select another language code until the subtitle is displayed properly.

3.Press ENTER.

Note:

The MPEG4 subtitle file name has to be identified with the MPEG4 file name to display by this unit.

MPEG4 disc compatibility with this player is limited as follows:

•Available resolution size of the MPEG4 file is under 720x576 (W x H) pixel.

•The file name of the MPEG4 subtitle is available by 56 characters.

•The total number of files in a folder should be less than 650 files.

•CD-R/RW, DVD±R/RW Format: ISO 9660

•If there is impossible code to express in the MPEG4 file, it may be displayed as “ _ ” mark on the display.

•If the number of the screen frame is over 30 per 1 second, this unit may not operate normally.

•If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.

•If the file is recorded with GMC, the unit supports only 1-point of the record level.

*GMC?

GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 encoders, like MPEG4 have this option.

There are different levels of GMC encoding, usually called 1-point, 2-point, or 3-point GMC.

Playable MPEG4 file

.avi, .mpg, .mpeg

• This unit does not support the DivX file.

Playable Subtitle format

SubRip(*.srt/*.txt) SAMI(*.smi)

SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) TMPlayer(*.txt)

DVD Subtitle System(*.txt)

VobSub(*.sub): Sub/idx, stream based format

Playable Audio format

“Dolby Digital”, “PCM”, “MP3”, “WMA”, DTS

•Sampling frequency: within 8 - 48 kHz (MP3), within 22 - 48 kHz (WMA)

•Bit rate: within 8 - 320 kbps (MP3), 32 - 256 kbps (WMA)

•Not all the WMA Audio format is compatible with this unit.

Notes on MPEG4 format

The “This file has the non-supported type on the player. Please movie into browser and select the other file.” will appear if this unit does not support the MPEG4 file.

Operation

21