Jwin JT-P560 Review Dialed Calls, Phone Book Review and Dial OUT, Auto Redial, Music Hold

REVIEW DIALED CALLS

1.Use [DIALED] to review the last dial out record, and

2.Press [DIALED] repeatedly to review all records.

3.Use [DEL] to delete a dialed call record.

PHONE BOOK REVIEW AND DIAL OUT

1.Press [BOOK] to go to the phone book.

2.Use [UP], [DOWN] to review and select records, or

3.Enter the first letter of the record by pressing the corresponding key. You can press the same key continuously to go through a range beginning with the same letter.

4.Press [RD/BACK] to dial a number after the record is located.

AUTO REDIAL

When a dialed number is busy:

1.Press [AUTO-RD] to activate auto-redial function. The phone will repeat dial the last dialed number 5 times. When the call gets through:

2.Press [SPEAKER] or lift the handset to converse.

MUSIC HOLD

This feature is automatic. When you are conversing with someone by phone and you need to put them on HOLD:

-Press [HOLD] to start music hold.

-Resume your conversation by picking up the handset or pressing [SPEAKER].When you resume your conversation the music will stop.

DIGITAL LOCK

Use this function to block specific numbers from being dialed on your phone.

To Activate Lock Function

1.Press [CODE] to enter lock manual. “INPUT PIN CODE” will display on the LCD.

2.Enter “8888” (the preset PIN code) and press [CODE] again. “UPDATE DATE CODELOCK” will display on the LCD.

3.Enter the desired digits you would like to block. Use “#” to separate the numbers, if necessary.

4.Press [CODE] to confirm and complete.

5.NOTE: If you would like to block all digits, enter “#**” and press [CODE] to confirm.

To Deactivate the Lock Function

1.Press [CODE] to enter the manual lock function. The LCD will display “INPUT PIN CODE”.

2.Enter “8888” (the preset PIN code) and press [CODE] again. The LCD will display “UPDATE DATE CODELOCK”.

3.Press [ DEL] to erase the locked digits.

4.Press [CODE] to confirm.