number.

MUSIC ON-HOLD BUTTON

To put your party on hold position, press the HOLD button. A pre-programmed music selection will play automatically for the party on hold.

RELEASING HOLD

Lift the receiver or press the SPEAKER button and speak to the holding party.

PAUSE BUTTON

In some cases, such as PABX (Private Automatic Branch Exchange) or for some long distance services, a pause should be part of the dialing sequence. The unit provides a stackable pause function (3.6 sec/pause).

MUTE BUTTON

To temporarily prevent the party on the line from hearing a private conversation you may be holding with someone else, press the mute button and deep it depressed. Release the button to resume your phone conversation.

P-T BUTTON

During pulse dialing, the P-T key provides automatic switching from pulse to tone dialing mode. Tone information can be stored in memory for autodial and redial functions.

TRANSFERRING CALLS

When in an office equipped with PABX, your unit makes it easy to transfer calls.

Ask calling party to wait.

Press and release the FLASH button.

Dial the number of the party you wish to transfer to.

When the party answers, announce the call and hang up. If you receive a busy signal or no answer:

Press the FLASH button to re-connect to your party.

RECEIVER VOLUME CONTROL

Slide the control from Min to Max to select the volume that you wish.

HANDSFREE SPEAKER VOLUME CONTROL

Slide the control from Min to Max to select the volume that you wish.

RINGER VOLUME CONTROL

Move the volume switch of handset: “HI” = High volume “LO” = Low volume

OFF – There will be no sound to indicate an incoming call, but there will be a flashing light to signal you.

12/30/20039:53 AM Page7

Page 7
Image 7
Jwin JT-P570 Music ON-HOLD Button, Releasing Hold, Pause Button, Mute Button, Transferring Calls, Receiver Volume Control