PLAY/PAUSE (power on)
DOOR OPEN
BATTERY DOOR

LOCATION OF CONTROLS

PROGRAM

ANTI-SKIP

CD MODE

LCD DISPLAY

CD SKIP

STOP BUTTON

(power off)

(NOT INCLUDED) DC IN 4.5V

ADAPTOR JACK

LINE OUT JACK

PHONES JACK

RECHARGE

INDICATOR

VOLUME CONTROL

BASS BOOST

HOLD

RECHARGE

CONTROL OPERATION AND FUNCTION

POWER SUPPLY

Your CD player requires 2 size “AA” alkaline batteries (not included), or use the AC adaptor 4.5V 600mA (not included)

AC ADAPTOR OPERATION

Plug one end of the AC adaptor into the DC 4.5V jack, then plug the other end into AC wall outlet. (not included)

PRECAUTIONS ON USING THE AC ADAPTOR

Put in AC adaptor spec. Please make sure you purchase the correct AC adaptor. Use of an incorrect AC adaptor will damage the unit.Don’t touch the AC adaptor with wet hands. Doing so is dangerous, as this could result in an electric shock.

If the adaptor plug is insert into the DC Jack of the Player, the power supply automatically switch to the AC/DC power and the batteries supply will be disconnected.

DC OPERATION

ALKALINE BATTERY INSTALLATION (NOT SUPPLIED)

Insert two AA batteries (not supplied) into the battery compartment on the bottom of the unit. Be sure to observe the proper polarity.

CHARGING AND USE OF RECHARGEABLE BATTERIES

This unit can fully recharge the specified rechargeable batteries, in approximately 15 hours. The rechargeable batteries (NOT supplied) should be recharged before they are used for the first time or they have not been used for a long period of time (over 60 days).

1.Open the battery compartment cover and insert two of the recommended rechargeable batteries, matching polarity. (1.2V 650mA).

ALL BATTERIES MUST BE OF RECHARGEABLE NICKEL-CADMIUM TYPE, OTHERWISE THE BATTERIES MAY EXPLODE OR LEAK.

2.Plug in the AC adaptor. (not included)

E.1

Page 2
Image 2
Jwin JX-CD477 instruction manual Location of Controls, Control Operation and Function Power Supply, DC Operation