Jwin JX-CD678 instruction manual Super ANTI-SKIP Operation

SUPER ANTI-SKIP OPERATION

This player incorporates a superior electronic anti-skip circuit which prevents interruption of the sound output when the unit is subjected to shock, vibration or rolling during disc playback. If in use the player is likely to be

subjected to shock, vibration or rolling ( i.e. while walking or if used in a vehicle )
press the Super ASP button to provide uninterrupted playback.
When the Super ASP button is pressed in the play mode the display will show
and the function is initialised. When		shows in the display the data buffer		is
full.
SuperASP Indicator	SuperASP Indicator		Super ASP Indicator

The sound will mute for approximately 1 second while the buffer fills. Once filled the buffer will give approximately 60 seconds of protection aga inst interruption of sound output . If the player is subjected to shock or rolling of over 60 seconds duration some interruption of sound output will occur. This is normal and to be expected and the sound will resume o nce the player has stabilized from the shock or rolling distu rban ces.

To turn this function off press the Super ASP button.

Notes:

1.When using the Super ASP function the battery power consumption increases because the disc rotates faster than normal and the dynamic menory is active.

2.While the Super ASP function provides for continuous sound output

when the unit is subjected to continuous shock, vibration or rolling it will not correct errors arising from the use of defective, scratched or dirty discs.

3.When powering the player solely from batteries, only use the Super ASP function where necessary to preserve battery life.

EN-11