Chapter 4
Using the QuickPan™
ADJUSTING THE SPRING FORCE OF THE PLUNGER
The dark colored adjusting screw which protrudes from the end of the plunger is used to vary the force of the spring plunger. This adjustment is typically used to provide more force when the plunger is moved towards the center of the detent. In general, the closer the plunger is to the center of the wheel, the more force is required in order to achieve a satisfactory detent action. You can also adjust the force simply to correspond to your personal preference.
You can tighten or loosen the adjusting screw when the plunger is installed or removed from the unit, as shown below.
Page - 6
