Toshiba SD-KV550SU owner manual Clock setting, To set Auto Clock to off, Auto Clock adjustment

AUTO CLOCK setting

Basic setup (VCR)

Clock setting

The AUTO CLOCK function will automatically set the built-in clock (Month, Day, Year and Time) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off. The DVD/VCR searches for a station in your area containing the necessary AUTO CLOCK setting signals. Once received, it will take approximately 4 minutes for the clock to set itself automatically.

POWER VCR DVD

VCR MENU

ENTER

SET +/–

CALL

To set AUTO CLOCK to off

When shipped from factory the AUTO CLOCK is set to “ON”.

Preparation:			But if you do not want AUTO CLOCK setting, it can be turned off:
• Turn ON the TV and select the corresponding video input.			1	Press VCR MENU.		￿￿￿￿	￿￿￿￿￿￿￿￿
• Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
	Connect the Antenna or Cable system.
1					￿￿￿￿￿￿￿￿￿￿￿
	• If you use a cable box, turn it on.				￿￿￿￿￿￿￿￿￿￿￿￿￿￿
2 Plug the AC power cord to the AC outlet.				Press SET + or – to select “SYSTEM SETUP”,
	Make sure the DVD/VCR is turned off.
3			2	then press ENTER.	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	• If you press POWER, the Auto Clock
	set is not programmed.
4	Wait at least three minutes and press POWER.				￿￿￿￿￿￿￿￿￿￿￿￿￿￿
			3	Press SET + or – to select “AUTO CLOCK”.
	Press CALL to check the clock setting on				￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
5 the on screen display.
	8 : 47AM MON	CH 125
	STEREO SAP				￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	00 : 00 : 00 SP		4 Press ENTER to select “OFF”￿.			￿￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿
	If the clock is not set, check the antenna
6 condition. The AUTO CLOCK may not
	function properly if the reception condition				￿￿￿		￿￿￿￿￿￿￿￿￿￿
	is not good.
					￿￿￿￿￿￿￿￿￿￿￿￿￿￿
AUTO CLOCK adjustment
				Press VCR MENU repeatedly to return to the
The AUTO CLOCK adjustment will be updated at			5 normal screen.
6:00 AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.				• When the AUTO CLOCK is set to
				“OFF”, the AUTO CLOCK adjust-
• If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be				ment does not function.You must set
left on.				the clock manually		26 .
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.

24

2I30201B-En_p18-25 24 1/13/06, 2:47 PM