Toshiba SD-KV550SU owner manual Connecting to optional audio equipment

Connections

Connecting to optional audio equipment

You can enjoy high quality dynamic sounds of DVD video discs or
audio CDs by connecting the DVD/VCR to optional audio	• This selection uses the following reference mark.
equipment.
		: Front speaker	: Center speaker
Connection for video signal to your TV, see 18 19 .
		: Rear speaker	: Signal flow

: Sub woofer

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic sound by connecting the DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

	Manufactured under license from
	Dolby Laboratories. “Dolby”, “Pro
	Logic” and the double-D symbol
Amplifier equipped with a	are trademarks of Dolby
Dolby Digital decoder	Laboratories.

To COAXIAL	• Use DVD video discs encoded
	via the Dolby Digital recording
type digital
	system.
audio input
75 Ω coaxial cable (not supplied)	To COAXIAL DIGITAL
	AUDIO OUT

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers).

With an amplifier equipped with Dolby Digital

Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so that you can enjoy Dolby Surround Pro Logic sound.

With an amplifier not equipped with Dolby Digital Connect the equipment as follows.

• This connection is only suitable for Video CDs and Audio CDs.

		* Connect one or two rear speakers.
		The output sound from the rear
*		speakers will be monaural even if you
	Amplifier equipped with	connect two rear speakers.
	Dolby Surround Pro Logic

To audio input

	To ANALOG
Audio cable (not supplied)	AUDIO OUT

Connecting to an amplifier equipped with a DTS decoder

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.

If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs or audio CDs.

		“DTS” and “DTS Digital Out” are
		trademarks of Digital Theater
Amplifier equipped with a		Systems, Inc.
DTS decoder		• Use DVD video discs or
		audio CDs encoded via the
To COAXIAL		DTS recording system.
type digital
audio input	Ω coaxial cable (not supplied)	To COAXIAL DIGITAL
75		AUDIO OUT

20

2I30201B-En_p18-25 20 1/13/06, 2:47 PM