Setup Mode
Screen 2: Configuring Transmitter IDs — Wireless Only
If you have a cabled station, press DONE and see “Screen 4: Time & Date” on page 12.
Setup screen 2 allows you to change the ISS transmitter ID and to add or remove optional transmitter stations. The default setting works fine for most installations. The default transmitter ID setting is “1” (ISS).
| 1 |
| Screen 2: Transmitter ID configuration |
| If you have a cabled station, or if you have a wireless station and are |
| using the default transmitter ID setting, press DONE to move to the next |
| screen. |
Note: | Typically, you can use the default transmitter ID setting of 1 unless you are installing |
| one of the optional transmitter stations or a nearby neighbor has a Vantage Pro2 Sta- |
| tion that uses transmitter ID 1 for the ISS. |
3.Press the right and left arrows to select the transmitter ID.
When you select a transmitter ID, the ID number is displayed on the screen as well as the current configuration.
4.Press the up or down arrows to toggle console reception of signals from transmitters using that ID on and off.
5.Press GRAPH to change the type of station assigned to each transmitter number. Scroll through the station types - ISS, TEMP, HUM, TEMP HUM, WIND, RAIN, LEAF, SOIL, and LEAF/SOIL - until the correct type appears.
6.Press DONE to move to the next screen.
Screen 3: Retransmit — Wireless Only
Press DONE and go to “Screen 4: Time & Date” on page 12 if you have a cabled station.
The console can take data it receives from the ISS and transmit it to other Vantage Pro2 consoles using the retransmit feature. By toggling the feature
11
