Selecting Units of Measure
To change units:
1.Select the weather variable.
See “Selecting Weather Variables” on page 21.
2. Press and release 2ND then press UNITS. | 2ND | UNITS | |
The selected variable’s units will change. Repeat | |||
| GRAPH | ||
steps 1 and 2 until the desired units appear. |
|
|
For example, to change the Barometric pressure units, first select Baro- metric pressure by pressing BAR. Next, press and release 2ND, then press UNITS. Repeating these steps cycles through the units available for Barometric pressure: millibars, millimeters, inches, and hectoPas- cals.
|
|
|
| BAROMETER |
|
|
|
|
|
| BAROMETER | mm |
|
|
|
|
| BAROMETER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| mb |
|
|
|
|
|
|
|
|
|
|
|
| in |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Displaying Units:
Barometric Pressure Units: millibars (mb), millimeters (mm) and inches (in)
Wind Speed and Direction
1. Press WIND to select wind speed.
WIND
2. Wind speed may be displayed in miles per hour (m.p.h.), kilometers per hour (km/h), meters per second (m/s), and
knots (knots). The 10 minute average wind speed will be displayed in the ticker.
A solid arrow within the compass rose indicates the cur- rent wind direction. Arrow caps indicate up to six differ- ent
3.Press WIND a second time to display the wind direction in degrees instead of the wind speed.
Each additional WIND key press toggles the display between wind speed and wind direction in degrees.
Outside and Inside Temperature
1. Press TEMP to select outside temperature.
Temperature may be displayed in degrees Fahrenheit (ºF)
or Centigrade (ºC).Temperatures can also be displayed in TEMP degrees or in tenths of a degree.
2.Press TEMP again to select inside temperature.
Each consecutive press of TEMP displays temperature readings for any optional temperature, temperature/humidity, soil temperature, soil mois- ture stations also connected to your console. The order the optional sen-
22
