Davis Instruments Vantage Pro2 manual Screen 4 Time & Date

Setup Mode

on, the console becomes another transmitter that requires its own unique ID to transmit the data received from the ISS.

2

Screen 3: Retransmit

1.Press the up or down arrow to turn the retransmit function on and off. The first available transmitter ID not used by the ISS or any optional sensor is automatically assigned. Data from the ISS is the only data that can be retransmitted by the console.

When retransmit has already been enabled, pressing the right arrow changes the transmitter ID used for retransmit.

2.Use the right arrow to scroll through the list of available transmitter IDs and select the ID for your console.

3.Press DONE to move to the next screen.

Note:	Make a note of the ID selected for retransmit. The console that receives the data
	from the console you have selected to retransmit should be configured to receive the
	transmitter ID you selected. See “Screen 2: Configuring Transmitter IDs — Wireless
	Only” on page 11 for more information.

Screen 4: Time & Date

The very first time you power-up the console, the time and date are set to

12:00AM January 1st, 2004. Be sure to enter the correct date and local time.

am

Screen 4: Time & Date

12