Chapter 3

Using Your Weather Station

The console LCD screen and keyboard provide easy access to your weather information. The large LCD display shows current and past envi- ronmental conditions as well as a forecast of future conditions. The key- board controls console functions for viewing current and historical weather information, setting and clearing alarms, changing stations types, viewing and/or changing station settings, setting up and viewing graphs, selecting sensors, getting the forecast, and so on.

Console Modes

The Vantage Pro2 console operates in five different modes:

Mode

Description

 

 

Setup

Use Setup Mode to enter the time, date, and other information required to

calculate and display weather data.

 

Current Weather

Use Current Weather Mode to read the current weather information, change

measurement units, and to set, clear or calibrate weather readings.

 

High/Low

High/Low Mode displays the daily, monthly or yearly high and low readings.

 

 

Alarm

Alarm Mode allows you to set, clear, and review alarm settings.

 

 

Graph

Graph Mode displays your weather data using over 100 different kinds of graphs.

 

 

Setup Mode

Setup Mode provides access to the station configuration settings that con- trol how the station operates. Setup Mode consists of series of screens for selecting console and weather station options. The screens that display in Setup Mode vary depending on the weather station type (cabled or wire- less), or if the console has a WeatherLink connection already established. See the WeatherLink Getting Started Guide for more information on con- necting your console to your computer.

Setup Mode Commands

Setup Mode displays when the console is first powered up. This mode can be displayed at any time to change any of the console/weather station options. Use the following commands to enter, exit and navigate Setup Mode:

Enter Setup Mode by pressing DONE and the down arrow (-) at the same time.

Note:

The console automatically enters Setup Mode when first powered.

 

 

 

 

Press DONE to move to the next screen in the Setup Mode.

 

Press BAR to display the previous screen in the Setup Mode.

9

Page 12
Image 12
Davis Instruments Vantage Pro2 manual Chapter Using Your Weather Station, Setup Mode Commands