Recording (VCR)

One-touch Timer Recording (OTR)

VCR DVD

The One-touch Timer Recording feature provides a simple and

CH +/–

convenient way to make a timed recording.

STOP

REC/OTR

SP/SLP

0–9

One-touch Timer Recording (OTR)

Preparation:

Turn ON the TV and select to the corresponding video input.

Press VCR DVD selector to select the VCR mode. (The VCR mode indicator will light.)

Example: One-touch Timer Recording for 30 minutes.

1 Load a cassette tape with the erase prevention tab intact.

The VCR will automatically turn on.

Press SP/SLP to select the desired tape speed

2 SP or SLP.

The tape counter and “SP” or “SLP” will appear on the screen for about 4 seconds.

￿￿￿￿￿￿￿￿￿￿

Set “TV” or “CABLE” option to the

3 appropriate position 27 .

 

 

 

 

 

TV

- VHF/UHF channels

 

CABLE

- Cable TV channels

 

 

 

36

4 Press Direct channel selection buttons (0–￿￿9)￿￿￿or

CH +/– to select the channel to be recorded.

5 Press REC/OTR. Recording begins. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR will increase recording time as shown in the chart below, up to a maximum of 6 hours.

Press

Recording time

Press

Recording time

once

NORMAL REC

6 times

3:00

 

 

 

 

twice

0:30

7 times

4:00

3 times

1:00

8 times

5:00

4 times

1:30

9 times

6:00

 

 

 

 

5 times

2:00

10 times

NORMAL REC

The OTR and recording time ￿￿will￿￿￿￿￿

appear on the screen for about ￿4 seconds, then change to “ ”.

￿￿￿￿￿

To cancel OTR

Press STOP or turn off the power.

” will appear on the screen for about 4 seconds.

Note:

If you wish to watch the DVD playback during OTR or standard recording, press VCR DVD selector to change to DVD mode and

perform the DVD playback 42 .

2I30201B-En_p32-37

36

1/13/06, 2:48 PM

Page 36
Image 36
Toshiba SD-KV550SU One-touch Timer Recording OTR, Set TV or Cable option to, Appropriate position, To cancel OTR