Ricoh 551, 700 manual Margin Adjustment, 170

Copying

Margin Adjustment

You can shift the image left, right, top or bottom to make a binding margin.

2

A

A

Limitation

❒If you set the margin too wide, areas you do not want to delete might be erased.

Note

❒You can change the width of the binding margin as follows:

Metric version	0 – 30mm (in 1mm steps)
Inch version	0" – 1.2" (in 0.1" steps)

❒The margin width default is as follows. You can change this default setting

with the User Tools. See “Front Margin: Left/Right”, “Back Margin: Left/

Right”, “Front Margin: Top/Bottom”, “Back Margin: Top/Bottom” in ⇒ P.317 “Page Format 1/2”.

Metric version	•	Front: 5mm Left
	•	Back: 5mm Right
Inch version	•	Front: 0.2" Left

•Back: 0.2" Right

❒When making two-sided copies from one-sided originals, you can set a bind- ing margin for back pages. See “1 → 2 Duplex Auto Margin Adjust” in ⇒ P.317 “Page Format 1/2”.

❒When making copies in Combine mode, the binding margins are made on the copies after the combining is finished.

❒When “2 Sided → 1 Sided” is selected, set the binding margins for front and back pages of the original.

170