Ricoh 700 If you use Batch Sadf mode, Copy output order, When copying in Sort/Staple mode, 233

Using Connect Copy

If you use Batch (SADF) mode

ASet your originals and press the {Start} key. After all the previously set originals are fed, set the next originals while the Auto Feed indicator is lit.

BWhen all pages have been scanned in, press the {#} key. Copying starts simultaneously in the master and sub-unit.

Note

❒To stop originals from being scanned or copied, press the {Clear/Stop} key on the master unit, then press the [Cancel] key following the instruc- tions on the display.

Reference	4
See ⇒ P.36 “Batch (SADF) mode”.

If the size of scanned data exceeds memory capacity, the memory over- flow message is displayed. Follow the instructions in “When Memory Is Full”. See ⇒ P.262 “Connect Copy”.

GPick up your copies from the master unit and sub-unit.

Note

❒The number of sheets and sets copied by the master unit and sub-unit may be different.

❒The master unit and sub-unit may not finish copying at the same time.

❒When using the Sort/Staple function, copies are organized into copy sets. If there is a paper jam in one machine during this process, it is not possible for the other machine to take over the copy set processing of the down ma- chine.

-Copy output order

❖When copying in Sort/Staple mode

e.g., copying 6-sets of a 3-sheet original

•Copying with the master unit (face down output)—sub-unit (face down output)

233