Ricoh 700, 551 manual To Stop Scanning Temporarily, To resume scanning, Press the Cancel key

Sort/Stack/Staple

CSet your originals, then press the {Start} key.

When setting a stack of originals in the document feeder

ASet a stack of originals in the document feeder, then press the {Start}key. After all the originals are scanned, the copies are delivered to the tray.

Note 2

❒The last page should be on the bottom.

When setting an original on the exposure glass or in the document feeder using Batch (SADF) mode

Reference

⇒P.36 “Batch (SADF) mode”.

ASet the original, then press the {Start} key.

Note

❒Start with the first page to be copied.

BSet the next original. When it is placed on the exposure glass, press the {Start} key.

Note

❒Set the original in the same direction as the first one.

CAfter all originals are scanned, press the {#}key.

To Stop Scanning Temporarily

When you are using the Sort, Stack, or Staple function, the originals are scanned into memory.

APress the {Clear/Stop}key to stop originals from being scanned into memo- ry.

To resume scanning

APress the [Resume] key to resume scanning.

Note

❒ Scanned images in memory are not cleared.

To clear scanned images of the originals

APress the [Cancel] key.

Scanning is stopped with the images cleared.

67