Ricoh 700, 551 manual Preset Stamp, 183

Stamp

EPress the [OK] key.

FSet your originals, then press the {Start} key.

Preset Stamp

2

Limitation

❒You cannot use the bypass tray with this function.

❒One message can be stamped at a time.

Note

❒One of the following eight messages can be stamped on copies with a frame around it: “COPY”, “URGENT”, “PRIORITY”, “For Your Info.”, “Prelimi- naray”, “For internal use”, “CONFIDENTIAL”, “DRAFT”.

❒You can change the print page with the User Tools.

❒You can change the size and density of the stamp with the User Tools.

❒Depending on the paper size, if you change the stamp size, parts of the stamp might not be printed.

❒You can choose the default settings for the position, size and density of the stamp with the User Tools. See “Stamp position”, “Stamp condition” in ⇒ P.323 “Preset Stamp”.

❒You can choose the default settings for the print page with the User Tools. See “Stamp condition” in ⇒ P.323 “Preset Stamp”.

❒You can change the stamp language with the User Tools. See “Stamp Lan- guage” in ⇒ P.323 “Preset Stamp”.

❒You can select whether the Preset Stamp is printed negative if it overlaps black parts of the image. See “Superimpose” in ⇒ P.323 “Preset Stamp”.

❒You cannot combine the Preset Stamp function with the Image Repeat or Double Copies function.

❒When you combine this function with the Magazine or Booklet function, only the first page is stamped.

183