Ricoh 700, 551 manual Copying from the Bypass Tray, Input/Output

Copying from the Bypass Tray

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP transparencies, adhesive labels, translu- cent paper, postcards, and copy paper that cannot be set in the paper tray.

Limitation
❒ When copying several originals using the bypass tray, copies are delivered	2
face up (“Face Up Exit”) and in reverse order by default.

❒You can change the setting to “Face Down Exit” only when you are using

high quality copy paper with a weight of 52 – 105g/m2 (14 – 28 lb. Bond). See “Face-Up/Down Selection in Bypass Mode” in ⇒ P.331 “Count Manager”.

❒If you have copies delivered face down when copying onto special paper, such as adhesive labels, a paper misfeed may occur. Be sure to select “Face Up Exit”.

Note

❒ If you wish to have copies delivered face down when only one original is set on the exposure glass or in the document feeder, you must set the “Face-Up/ Down Selection in Bypass Mode” setting to “Face Down Exit” and the “Face- Up/Down Selection in Platen Mode” setting to “Face Down Exit” with the User Tools. See “Face-Up/Down Selection in Bypass Mode” in ⇒ P.331 “Count Manager” and “Face-Up/Down Selection in Platen Mode” in ⇒ P.329

“Input/Output”.

❒ The machine can automatically detect the following sizes as standard size copy paper:

Metric version

A3L, A4L, A5L

Inch version

A3

L

, 11"

×

17"

L

, 8

1

/2"

×

14"

L

1

×

L

, 8"

×

10

1

/2"

K

, 8 /2"

11"

, 8"

× 10"K, 51/2" × 81/2"L

❒ If you do not use the standard size copy paper, you should input vertical and horizontal dimensions. The sizes that you can input are as follows:

Metric version	• Vertical: 100 – 300mm
	•	Horizontal: 140 – 432mm
Inch version	•	Vertical: 4.0" – 11.7"

•Horizontal: 5.6" – 17.0"

❒To make copies onto OHP transparencies or thick paper exceeding 105g/m2, 28 lb. Bond, specify the paper type in ⇒ P.76 “When Copying onto OHP Trans- parencies or Thick Paper”.

❒The maximum number of sheets you can set at a time depends on the paper type. For details about paper capacity of the bypass tray, see ⇒ P.23 “Copy Pa- per”.

73