Ricoh 700, 551 manual Original Beeper, Sample Copy, Set your originals Press the Start key

Other Functions

BSet your originals.

CPress the {Start} key.

Copying automatically starts when the {Start} key indicator flashes red and green and the machine is ready for copying.

Note

❒ In Connect Copy mode, copying starts when the master unit is ready for
	2
copying.

❒To cancel Auto Start, press the {Clear/Stop}key.

❒In Connect Copy mode, press the {Clear/Stop} key on the master unit to cancel Auto Start.

Original Beeper

The beeper sounds and an error message is displayed when you leave your orig- inals on the exposure glass after copying.

Note

❒You can adjust when the beeper sounds with the “Auto Response (Human) Sensor” setting:

•If set to “Yes”, the beeper sounds as soon as you leave the machine after copying.

•If set to “No”, the beeper sounds 2 seconds after copying. See “Auto Re- sponse (Human) Sensor” in the System Settings manual.

❒To cancel this function, see “Original Beeper” in ⇒ P.313 “General Features 2/

3”.

Sample Copy

Use this function to check a copy set before making a long copy run.

Limitation

❒This function can be used only when the Sort function has been turned on.

Note

❒This function is only available on the master unit in Connect Copy mode.

ASelect Sort and any other functions, then enter the number of copy sets to be made.

BSet the originals.

CPress the {Sample Copy} key.

One copy set is delivered for proof copying.

91