Ricoh 700, 551 manual Adjust Image, Combine, 259

	If You Cannot Make Copies As You Want
Problem	Cause	Action
The copied images differ.	The “Original Mode Quali-	See “Original Mode Quali-
	ty Level” of the User Tools	ty Level” in ⇒ P.310 “Gen-
	settings are not the same.	eral Features 1/3”.
	The installation of the op-	Press the [Connect] key to
	tional finisher or booklet	exit Connect Copy mode,
	finisher in both units are	then start copying.
	not the same.

Adjust Image

Problem	Cause	Action
In Double Copies mode,	Combination of original	Select the proper original
parts of the original image	and copy paper is not cor-	and copy paper. See ⇒
are not copied.	rect.	P.165 “Double Copies”.
			5
In Border, Center, or Cen-	You set the wide erased	Set the narrow margin with
ter/Border mode, parts of	margin.	the User Tools. See “Erase
the original image are not		Border” and “Erase Cen-
	Your original has narrow
copied.		ter” in ⇒ P.317 “Page For-
	margins on four sides.
		mat 1/2”.
In Margin Adjustment	You set the wide erased	Set the narrow margin with
mode, parts of the original	margin.	the User Tools. See “Front
image are not copied.		Margin: Left/Right” and
		“Back Margin: Left/Right”
		in ⇒ P.317 “Page Format 1/
		2”.
In Image Repeat mode, the	You selected the same size	Select copy paper larger
original image is not cop-	copy paper as originals,	than the originals.
ied repeatedly.	and did not select the prop-
		Select the proper reproduc-
	er reproduction ratio.	tion ratio.
Combine
Problem	Cause	Action
You cannot make a book	Combine Original Booklet	Change the setting. See ⇒
from a booklet or magazine	Format or Combine Origi-	P.115 “Combine”.
by folding copies.	nal Magazine Format is not
	correct.

259