Ricoh 551, 700 manual Other Functions, Energy Saver Mode, Interrupt Copy

Copying

Other Functions

Energy Saver Mode

If you do not operate the machine for a certain period after copying, or when you press and hold the {Clear Modes/Energy Saver}key for more than one second, the

2 display disappears and the machine enters Energy Saver mode. When you press the {Clear Modes/Energy Saver}key again, when the originals are set in the docu- ment feeder, or when the document feeder is opened, the machine returns to the ready condition. In Energy Saver mode, the machine uses less electricity.

Energy Saver mode makes a two-step reduction in electricity: one for the period up to the time set for Low Power mode, the other for the period after that time.

Note

❒If you press the {Clear Modes/Energy Saver} key during the operation, the cur- rent settings will be cleared.

❒It takes about 10 seconds to return to the ready condition from Energy Saver mode.

❒It takes about 30 seconds to return to the ready condition from Low Power mode.

❒If you press the {Clear Modes/Energy Saver} key while setting Connect Copy, Connect Copy mode is canceled and the machine returns to the initial condi- tion of Copy mode.

❒If you press the [Connect] key on the master unit, the sub-unit exits Energy Saver mode and enters Connect Copy mode.

❒In Connect Copy mode, the sub-unit will not enter Energy Saver mode.

Reference

See “Low Power Timer” in the System Settings manual.

Interrupt Copy

Use this function if you wish to interrupt a long copy job to make urgently need- ed copies.

Note

❒The procedure for making interrupt copies depends on which kind of opera- tion the machine is currently carrying out.

❒You can use Document Server mode in Interrupt Copy mode.

❒In Connect Copy mode, you cannot use the Interrupt Copy function on the master unit.

❒In Connect Copy mode, you cannot use the Interrupt Copy function on the sub-unit while the master unit is scanning an original.

88