Ricoh 551, 700 manual 192, Press the Exit key

Copying

EEnter the horizontal size of the stamp with the number keys, then press the [#] key.

2

Note

❒To change the value entered, press the [Clear] or {Clear/Stop}key and en- ter the new value.

❒You can enter sizes within 10 – 432mm, 1.0" – 17.0" horizontal, and 10 –

297mm, 1.0" – 11.7" vertical. However, if the value exceeds the maxi- mum value of the area (5,000mm2, 7.75 inch2), it is corrected within the range of the area automatically.

FPress the [Vertical] key, and enter the vertical size in the same way as step

E.

GSet the user stamp on the exposure glass, and then press the [Scan Start] key.

Note

❒Do not set the original in the document feeder.

❒The machine scans the original three times. Do not lift the document feeder until the main menu of the Copy features appears.

❒If you press the [Exit] key, the main menu of the Copy features appears with nothing programmed.

HPress the [Exit] key.

192