Ricoh 551, 700 manual Progress, 252

5

What to Do If Something Goes Wrong

Connect Copy

Machine Status	Problem/Cause	Action
The [Connect] key does not	The main power switch on	Turn on the sub-unit main
appear on the display.	the sub-unit is off.	power switch.
	The operation switch on	Press the operation switch
	the sub-unit is off.	on the right side of the con-
		trol panel. The On indica-
		tor will goes on.
		Note
		❒ The machine will be
		ready to operate about
		five minutes after turn-
		ing power on.
	The master unit is not in	Press the {Copy/New Job}
	Copy mode (i.e., in Docu-	key on the master unit to
	ment Server mode).	switch to Copy mode.
	The master unit is in Inter-	Press the {Interrupt}key on
	rupt mode.	the master unit to exit In-
		terrupt mode.
	The master unit is in Job	Exit Job Preset mode in one
	Preset mode.	of the following ways.
		❖ If you are still selecting
		copy settings and copy-
		ing has not started yet:
		Press the [Cancel] key
		then remove the origi-
		nals set in the master
		unit document feeder.
		❖ If Job Preset mode is in
		progress:
		Press the {Clear/Stop}
		key, follow the instruc-
		tions on the display
		then press the [Cancel]
		key.
		Reference
		See ⇒ P.83 “Job Preset”.

252