Ricoh 700, 551 239, For details, see the System Settings manual

Relationship Between Master Unit and Sub-Unit System Settings

Relationship Between Master Unit and Sub-Unit System Settings

This section describes which System Settings are used by the master unit and sub-unit in Connect Copy mode.

Note

❒In Connect Copy mode, the {User Tools/Counter} key on the sub-unit is dis- abled. To access the User Tools on the sub-unit, you need to exit Connect Copy mode first.

Reference

For details, see the System Settings manual.
					4
Symbol	Meaning
✩	The master unit and sub-unit use each setting
←	Both units use the master unit setting
—	Unrelated
★	Depends on the function
Menu		Master	Sub-unit	Remarks
		unit
Basic Page 1
Operation Panel Beeper		✩	✩
Ready Operation Panel		✩	✩
Beeper
Copy Count Display		—	—	The copy counter is always
				displayed in count up mode.
Auto Response (Human)		✩	Invalid	Disabled even if the sub-unit
Sensor				setting is “Yes”.
Auto Tray Switching		✩	✩
Auto Off Timer		✩	—
Low Power Shift Time		—	—	In Connect Copy mode, nei-
				ther unit will enter any of En-
Low Power Timer		—	—
				ergy Saver modes (Low
				Power mode, Energy Saver
				mode). When Connect Copy
				is exited, the machines will
				enter Energy Saver mode af-
				ter the programmed delay
				elapses.

239