Ricoh 551, 700 manual 238, Press the Connect key

Connect Copy (Option)

❒The print settings of the document you select first are applied to the merged documents.

❒If you select multiple files, you can confirm the file names or print order of the files you selected in step C by scrolling through the list with the [T] and [U] keys.

❒Press the [Select File] key to return to the “Document Server: Files” display.

Reference

For details, see the explanations of each function in this manual.

EPress the [Connect] key.

When the key darkens, the two units are connected.

FEnter the required number of prints using the number keys.

4

Note

❒Up to 999 can be entered.

❒To change the value entered, press the {Clear/Stop} key and enter a new value.

❒If you print more than one set using the Sort function, you can check the print result by printing out only the first set. See ⇒ P.218 “Sample Printing”.

GPress the {Start} key.

Printing starts after the image data stored in the master unit has been trans- ferred to the sub-unit.

Note

❒The printing may take some time after transferring the image data to the sub-unit.

❒To stop originals from being printed, press the {Clear/Stop}key on the mas- ter unit, then press the [Cancel] key following the instructions on the dis- play.

❒The number of sheets and sets printed by the master unit and sub-unit may be different.

❒The master unit and sub-unit may not finish printing at the same time.

238