Ricoh 551, 700 manual If Connect Copy Is Cleared, 254

5

What to Do If Something Goes Wrong

If Connect Copy Is Cleared

Machine Status	Problem/Cause	Action
Exited Connect Copy.	The master unit main pow-	Connect Copy is cancelled
	er switch has been turned	and the display returns to
	off or the operation switch	copy standby mode. On the
	has been pressed.	master unit, either turn on
		the main power switch or
		press the operation switch,
		then press the [Connect] key
		and start your copy job
		again.
	Either the sub-unit main	A message requesting you
	power switch has been	to check the sub-unit is dis-
	turned off or the operation	played on the master unit.
	switch has been pressed.	Press the [Cancel] key and
		clear connect-copying. Ei-
		ther turn on the main pow-
		er switch on the sub-unit or
		press the operation switch
		and then press the [Con-
		nect] key.
	The Weekly Timer function	Press the master unit oper-
	has automatically turned	ation switch then press the
	the master unit off.	[Connect] key and copy.
		Reference
		See “Weekly Timer” in
		the System Settings
		manual.
An error message indicat-	L indicator is lit.	Copying is not possible.
ing a breakdown is shown		Follow the instructions dis-
on the master unit display.		played in the error mes-
		sage.

254