Ricoh 700, 551 manual If You Cannot Exit Connect Copy, 255

	If Your Machine Does Not Operate as You Want
If You Cannot Exit Connect Copy
Machine Status	Problem/Cause	Action
Nothing happens when	Originals are being	Press the master unit
you press the [Connect] key.	scanned or copied.	{Clear/Stop}key and then
		press the [Cancel] key to
		cancel scanning or copy-
		ing.
	There is a paper misfeed in	Clear the paper misfeed in
	either the master unit or	the master unit or sub-unit.
	sub-unit.	Reference
		⇒ P.270 “x Clearing
		Misfeeds”
		⇒ P.293 “e Removing
		Jammed Staples”
		If the display shows that a
		cover is open, follow the in-
		structions given. For all
		other situations, follow the
		instructions on the display.
		To exit Connect Copy
		mode, press the master
		unit {Clear/Stop}key, then
		press the [Connect] key.
	The master unit {Clear/	To exit Connect Copy
	Stop}key was pressed and	mode, follow the instruc-
	scanning of the original has	tions on the display, then
	been interrupted.	press the [Cancel] key.
	The {Clear/Stop}key was	To exit Connect Copy
	pressed on either the mas-	mode, follow the instruc-
	ter unit or sub-unit and	tions on the display, then
	copying has been inter-	press the [Cancel] key.
	rupted.

5

255