Zanussi ZDI 122 user manual Something not working, Cut off the cable and plug and dispose of them

Models: ZDI 122

1 24
Download 24 pages 9.46 Kb
Page 17
Image 17
When a unit is no longer being used:

CAUTION!

When a unit is no longer being used:

Pull the plug out of the socket.

Cut off the cable and plug and dispose of them.

Dispose of the door catch. This prevents children from trapping themselves inside and endangering their lives.

The symbol •Cut off the cable and plug and dispose of them. on the product or on its pack- aging indicates that this product may not be treated as household waste. Instead it should

be taken to the appropriate collection point for the recycling of electrical and electronic equip- ment. By ensuring this product is disposed of correctly, you will help prevent potential nega- tive consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

Something not working

The dishwasher will not start or stops during operation.

Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.

Switch off the dishwasher, open the door and carry out the following suggested corrective ac- tions.

Fault code and malfunction

continuous flashing of the start/cancel indicator light

1 flash of the end of programme indicator light The dishwasher does not fill with water

continuous flashing of the start/cancel indicator light

2 flashes of the end of programme indicator light The dishwasher will not drain

Possible cause and solution

The water tap is blocked or furred with limescale Clean the water tap

The water tap is turned off

Turn the water tap on

The filter (where present) in the threaded hose fitting at the water inlet valve is blocked

Clean the filter in the threaded hose

The water inlet hose has not been correctly laid or it is bent or squashed

Check the water drain hose connection

The sink spigot is blocked Clean out the sink spigot

The water drain hose has not been correctly laid or it is bent or squashed

Check the water drain hose connection

17

Page 17
Image 17
Zanussi ZDI 122 user manual Something not working, When a unit is no longer being used Pull the plug out of the socket