Troubleshooting Phaser 860 Printers

Front panel error messages

When in a menu, the front panel returns to Ready to Print

The front panel menu times out and returns to Ready to Print if no activity occurs in the menu system in 2 minutes.

If you want to re-enter the menu system, highlight Menus and press the OK key.

Output tray full

Too much media is stacked in the output tray. Remove all printed pages from the output tray.

Ink low - Add ink

One or more ink-loading bin is almost empty. Add more ink soon.

If needed, order additional Phaser 860 Xerox ColorStix® II ink sticks.

Out of ink

One or more ink-loading bin is empty. Add more ink sticks to the bin that is empty.

A label above each bin indicates the color and color number of that bin. Because the magenta, cyan, and black ink sticks are all dark, refer to its color number to determine which bin to load the ink stick. Don't worry if the yellow ink sticks have darker areas.

Use only Phaser 860 Xerox ColorStix® II ink sticks; the use of other ink may affect print quality and reliability. Xerox warranties and service contracts do not cover damage, malfunction, or degradation of performance caused by the use of non-Xerox supplies or consumables or the use of Xerox supplies not specified for use with this printer.

Each ink stick is uniquely shaped to fit into the correct ink-loading bin. Insert the ink stick's narrow end first.

Ink sticks jammed

One or more ink sticks are stuck in the ink-loading bin. Open and close the top cover.

If the problem persists, move the ink sticks until there are no spaces between sticks of the same color.

To prevent problems:

Do not use broken ink sticks.

Always install the ink stick's narrow end first.

Maintenance drawer (A) locked

The maintenance drawer (labeled A) is locked because it contains hot ink that could cause burns. You cannot remove the maintenance drawer until the ink has cooled.

Close the front cover and wait at least five minutes for the ink to cool before removing the maintenance drawer from the printer.

Printing resumes when the maintenance drawer is unlocked and the cover is closed.

Advanced Features and Troubleshooting Manual

47

Page 53
Image 53
3Com 860 manual Front panel error messages