Fault code and malfunction

•continuous flashing of the start/cancel indicator light

•3 flashes of the end of programme indicator light

•The programme does not start

Possible cause and solution

• Anti-flood device is activated

Close the water tap and contact your local Service Force Center.

• The dishwasher’s door has not been properly closed

Close the door

•The main plug is not plugged in Insert the main plug

•The fuse has blown out in the household fuse box Replace the fuse

•Delay start has been set

If dishes are to be washed immediately, cancel the delay start

Once these checks have been carried out; close the dishwasher’s door and switch on the appliance. Press the button of the programme that was running before the intervention of the alarm. The programme will continue from the point at which it was interrupted.

If the malfunction or fault code reappears con- tact the Service Force Centre.

For other fault codes not described in the above chart, please contact your Service Force Cen- tre.

Contact your local Service Force Centre, quot- ing the model (Mod.), product number (PNC) and serial number (S.N.).

This information can be found on the rating plate located on the side of the dishwasher door.

So that you always have these numbers at hand, we recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . .

PNC :. . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . .

ZDI 122 specifications

The Zanussi ZDI 122 is a remarkable built-in dishwasher that combines innovation, efficiency, and sleek design to fulfill modern kitchen needs. With a capacity to accommodate up to 12 place settings, it caters to both small families and larger households, ensuring that your dishwashing chores are managed effectively.

One of the standout features of the ZDI 122 is its energy efficiency. Rated with an A+ energy class, this dishwasher is designed to minimize energy consumption while delivering exceptional cleaning results. This not only helps in reducing your utility bills but also contributes positively to environmental sustainability, making it an ideal choice for eco-conscious consumers.

The ZDI 122 employs advanced washing technologies that ensure optimal cleaning of all types of dishware. Its MultiZone feature allows users to customize the washing power according to their needs. For instance, if you have a smaller load, you can activate only the upper or lower basket, saving both water and energy. This flexibility is complemented by a variety of wash programs, including intensive, normal, and quick washes, so you can choose the perfect setting based on your specific requirements.

The height-adjustable top basket is another highlight, making it easier to accommodate larger pots and pans when needed. Inside, the special Flexi Cutlery Basket ensures that utensils are thoroughly cleaned without the risk of nesting, which can lead to less effective washing results.

Noise level is also a crucial factor in the design of the ZDI 122. Operating at a quiet 49 dB, it allows for seamless integration into your home life without the disturbance commonly associated with dishwashers.

Moreover, the Zanussi ZDI 122 features a delay start option, giving you the freedom to schedule washes during off-peak hours, further enhancing its energy efficiency. The LED indicators provide clear information about the wash cycle, making it user-friendly.

In summary, the Zanussi ZDI 122 is not only a practical addition to any kitchen but also represents cutting-edge technology in dishwashing. With its combination of efficiency, intelligent design, and ease of use, it is an appliance that simplifies your daily routine while ensuring that your dishes come out sparkling clean every time.

Zanussi ZDI 122 user manual Fault code and malfunction

Models: ZDI 122