Ricoh 551, 700 manual Open the bypass tray, Adjust the guides to copy paper size, Extender

Copying

❒In Connect Copy mode, you can set only cover sheet paper and slip sheet pa- per for the Cover/Slip Sheet function in the bypass tray.

AOpen the bypass tray.

2

ZBQH050E

BAdjust the guides to copy paper size.

Important

❒If the guides are not flush with the copy paper, a skew image or paper mis- feeds might occur.

CLightly insert the copy paper face up until the beeper sounds. The k indicator on the display automatically goes on.

1

ZBQH040E

1.Extender

Note

❒The face side of the paper set is copied on.

❒Do not stack paper over the limit mark, otherwise a skew image or paper misfeeds might occur.

❒If the beeper is turned off, lightly insert the copy paper until it stops. See “Operation Panel Beeper” in the System Settings manual.

❒When the document feeder is open, set the direction of the copy paper to L.

74